Electric flat car common fault solution?
2022-01-17
Electric flat car common fault solution?
Electric flat car without power display
1, no electricity: whether the electrical system to the electric flat car power supply, generally with the test pen test, such as no power, and then work after the power transmission.
2, the voltage is too low: the electric flat car end voltage is more than 10% lower than the rated voltage, the electric flat car starting torque is too small, so that the electric flat car can not move, and can not work, when checking, with a multimeter or voltmeter and other measures the input voltage of the electric flat car.
Third, the temperature of the electric flat car is too high:
1, overload use: overload causes the electric flat car to heat up, long-term overload will burn the electric flat car, so the flat car load must be within the rated load range.
2. Electric flat car bearing damage: replace the electric flat car bearing.
3. There is no provision for working system work: when using it, it should be strictly in accordance with the electric flat car working system.
Fourth, when transporting heavy loads, it cannot be started after stopping:
1. The system voltage is too low or fluctuates too much: wait for the electric flat car voltage to return to normal before starting.
2. The lack of phase of the electric flat car: check the number of power phases.
All of the above content is the relevant matters shared by The Manufacturer of Parfit Handling Equipment for everyone, more electric flatbed truck information welcome to lock the Official Website of Parfit Handling for more details!
All of the above content is the relevant matters shared by The Manufacturer of Parfit Handling Equipment for everyone, more electric flatbed truck information welcome to lock the Official Website of Parfit Handling for more details!
