How should the industrial rail trolley DC motor cover be protected
2019-05-06How should the industrial rail trolley DC motor cover be protected
The motor is an indispensable part of the many components of the industrial rail trolley.After all,the trolley is driven by electric power.The motor is a key part of the conversion of electric power.Among them,the DC motor is widely used in the industrial rail trolley.Then,in general,the trolley is flat.How to protect the car DC motor cover?Xiaobian hereby reminds that the following points must be concerned!
What kind of points should be noted for this kind of DC motor,the following one gives instructions:
1.It is not allowed to start with no load.The industrial rail trolley is a handling tool and needs to carry a certain amount of cargo.This is especially important;
2.There should be no explosive gas in the cooling air to prevent accidents.
3.Whether the performance of the motor is intact,it is determined that it can work normally under the condition of rated nominal voltage of 1.1 times to 0.75 times.
4.The maximum working current of the motor is 3 times of the rated current,the allowable time is 1 minute(30 seconds for each positive and negative rotation),and the output torque is 4.5 times of the rated torque.
In addition,the industrial rail trolley DC motor also has some performances,such as high temperature,low temperature,humidity and other environments,even in the environment where the relative humidity can reach 100%.In order to ensure the effective use of the motor,Xiaobian reminds you Product user.
In addition,the industrial rail trolley DC motor also has some performances,such as high temperature,low temperature,humidity and other environments,even in the environment where the relative humidity can reach 100%.In order to ensure the effective use of the motor,Xiaobian reminds you Product user.
